outputs

Milt · Post by **Milt** » Sat Jul 13, 2019 2:53 pm

How does one activate all the outputs, or are they aiready activated? Would like to find some documentation on outputs.

Azimuth (Archive) · Post by **Azimuth (Archive)** » Sat Jul 13, 2019 3:02 pm

All 8 stereo outputs are enabled by default. Make sure that the "Downmix" toggle is [b:d834e5c86b]NOT[/b:d834e5c86b] enabled in the lower left-hand side of the Mixer window. You can disable individual outputs in the Mixer panel by clicking on the "Out 1" through "Out 8" labels. Also, make sure that you choose the 8 Channels Audio Outputs Routing Preset in the Kit dropdown menu if you want to use all outputs. See page 17 in the User Manual for more information.

Milt · Post by **Milt** » Sun Jul 14, 2019 10:14 am

Thanks very much for the help!!

Post by **Ralph @ Rayzoon** » Sun Jul 14, 2019 10:29 am

Click 'Kit' in the main tool bar, open the kit menu and select the 8 channel option in the 'Audio Output Routing Presets' sub-menu.

Please note that this is only necessary if your kit does not use multiple outputs. All Jamstix 4 kits are already designed with multiple outputs in mind so the above step should not be necessary for them.

Milt · Post by **Milt** » Sun Jul 14, 2019 3:03 pm

Thanks Ralph.

jas_lan · Post by **jas_lan** » Sun Jul 14, 2019 7:30 pm

Just wanted to add that the outputs may also need to be activated in the DAW. I know that Cubase, for example, works that way.